Table of Contents
Some customers report problems with their Ferris mowers, including the engine cutting out unexpectedly or failing to start. Some customers also complain about poor customer service from the dealer or manufacturer when they report these problems.
Before proceeding, you must know about Ferris as a brand of zero-turn mowers manufactured by Toro Company, a business unit of the Toro Company, which also makes tillers and other mower types. Ferris makes numerous models of zero-turn lawnmowers, including self-propelled, commercial-grade, and residential-grade models. The company also offers a variety of attachments for its mowers, including snowblowers and dethatchers.
Why is Ferris’s zero-turn mower not working?
Several factors contribute to the overall quality of the mower. Most companies that manufacture zero-turn lawn mowers have a dedicated customer service department. If you experience any problems with your Ferris mower, you should contact them directly. Here are some common reasons:
Dull Blades
The blades are dull and need to be replaced. This is the most common problem you will encounter with your zero-turn mower. Dull blades cause poor cutting performance and leave a rough surface on your lawn. You can replace them yourself or have a professional do it for you. It’s usually best to change all four blades at once to match in length and sharpness.
Blade Control Lever
The blade control lever is broken or stuck closed, so it won’t move when activated by the operator. This may result from improper operation or abuse by previous owners/operators. Still, it can also happen due to normal wear and tear over time depending on how often you use your mower, how often you clean it, etc… If this happens, you’ll need to replace the entire control lever assembly, which includes everything except for the handlebar itself (no tools required).
Engine Stalling
Stalling is one of the most common issues with zero-turn mowers. The engine will stall when it overheats or when there’s a problem with the fuel system or dirty spark plugs. If your engine is regularly stalling, check the spark plugs first and ensure they’re clean and gapped correctly (the gap should be 0.030 inches). If they’re dirty or too old, replace them with new ones immediately! Then check your fuel filter for any obstructions and replace it if needed. If all else fails, check your air cleaner for clogs (this can happen if you use ethanol-based fuel in your lawn mower).
Battery Problems
If you have been using your zero-turn mower for more than a week, then it is possible that the battery is dead and needs charging. If this happens, you can simply charge the battery by taking it to a local auto parts store offering free battery charging services.
Belt slipping
The belt on your zero-turn mower makes it move in a circular motion. If this belt slips off its pulley, it could cause damage to your lawnmower’s engine or transmission. You should always check this belt before you start using your machine. If it looks worn out or frayed, replace it immediately with a new one so that you do not experience any issues while using your machine.
Clutch Slipping
This is another common issue people have with their Ferris zero-turn mowers. If the clutch slips while you are operating your zero-turn mower, then there is a good chance that you will damage either your engine or transmission. You should always check this part before starting up your machine to know whether it is working properly at all times during the use of the mower.
Clutch Not Disengaging
This can be a problem sometimes, but it more often than not occurs because the operator needs to learn how to use their zero-turn mower correctly. The clutch should disengage automatically when the operator takes their foot off the pedal. Still, if it does not, you should immediately contact the manufacturer for assistance with this issue.
Ferris Zero Turn Mower Problems fuel pump problems
- Outside Of The Clutch: You first need to check for any signs of oil leaking onto the outside of your clutch assembly. If oil leaks on the outside of this part, there could be problems with the gaskets or seals in this area. You may also notice some burning smells coming from inside of this area if there are problems with either gaskets or seals inside of this area.
- If there are no signs of oil on the outside of this area, you should check inside for any signs of leakage.
- Leaks Around Carburetor: The next place to look for leaks is around the carburetor. If you see any fuel or oil dripping from this area, check all the bolts holding it. If any of them are loose, tighten them immediately.
- Fuel Lines: If there is no sign of leakage, you should check your fuel lines. These can become damaged and cause fuel leaks, so they must be inspected regularly and replaced if necessary.
- Check Coolant System: If all else fails, check your coolant system for signs of leakage. Coolant leaks can be very dangerous because they can lead to overheating problems that could result in serious engine damage.
Belt Issues
The belt on any machinery is crucial to its operation, and if it breaks or snaps off, it can cause serious damage to both the machine and the operator. When this happens, stop using your equipment immediately and call a professional to fix it immediately.
Bad Bearings
If the bearings in your zero-turn mower are bad, they can cause many problems, including loss of power or overheating and making strange noises while running. When this happens, stop using your equipment immediately and contact an expert technician who can replace them immediately.
Engine overheating
Another problem with many Ferris zero-turn mowers is engine overheating. Several things can cause this, but it is often caused by insufficient engine oil or a bad thermostat. For this reason, it’s important to check both of these parts before each use to ensure proper operation at all times.
Steering wheel problems
Many things can cause steering wheel problems, but one of the most common reasons for steering wheel malfunction is wear and tear on the part itself. If this happens, you may need to replace the steering wheel completely if it cannot be repaired correctly.
Transmission Issues
Transmission issues are also very common with zero-turn mowers and can happen anytime. These issues may be caused by anything from a mechanical problem to an electrical issue, but they can be extremely serious if they aren’t resolved quickly.
Engine Problems
Engine problems can cause your zero-turn mower to malfunction, especially if the engine isn’t running properly. If your engine is running differently than normal, it’s important to have it looked at as soon as possible because it could lead to more serious problems.
Fuel System Issues
Fuel system issues usually result in poor performance or even complete failure of the machine, so you must address these problems as soon as possible. You should always ensure enough fuel in the tank before operating your zero-turn mower, but even after topping off the tank, some engines may still need to perform better due to fuel system issues.
What Would Cause A Zero-Turn Mower Not To Start
If you’re having trouble starting your Ferris zero-turn mower, there are several common causes.
If the engine won’t turn over or start, it could be due to one of these issues:
- The fuel tank is empty.
- The fuel line is clogged or leaks.
- There is no spark in the engine (electrical problem).
- The air filter is clogged or broken.
Why Is My Ferris Not Getting Fuel?
The most common problem with a Ferris zero-turn mower is that the engine needs fuel. If you are having trouble starting your mower, it’s possible that the fuel tank is empty or something needs to be fixed with the gas line.
Checking The Gas Tank
If your mower is not getting fuel, you can check to see if there is enough in the tank by pulling out the dipstick on the side of the mower. If the gas level is below half (or less), you will need to fill up your tank so that it can get enough fuel to start working again.
Checking The Gas Line
Next, you should check your gas line for any signs of damage or clogging from dirt or debris. If there are any cracks or holes in your gas line, then this could be causing issues with getting gas out of the tank and into the carburetor where it needs to go.
Does The Ferris Zero-Turn Mower Have A Traction Problem?
Yes, it does. The problem is that the drive belt needs to be tight enough. The belt should be tightened until it is difficult to turn the mower’s blade by hand. If you don’t have a way to tighten the belt, take it to a repair shop and have them tighten it for you.
Ferris Mower Electrical Problems
Wiring
The first problem is that the wiring can get damaged by debris or corrosion. If your mower is not starting up, this may be due to a wiring problem. You will need to remove the deck and check for any damage to the wiring harnesses on the engine and deck. If you find any damaged wires, you will need to replace them before starting the mower again.
A Dead Or Weak Battery
If your battery has died or is weak, it will not be able to start your lawnmower. You will need to replace it with a new one. Be sure to follow all safety instructions when replacing batteries because they can blow up if you don’t know what you’re doing. If you don’t know how to replace a battery, contact us here at Lawnmower Pros, and we’ll be happy to help!
Power Issues
The most common problem with a Ferris mower is that it will not start. If this happens, check the electrical connections on the battery and starter. Make sure the connections are tight, and there is no corrosion or dirt in them. Also, check that the battery terminals are clean and free of corrosion. If they are corroded, use a wire brush to clean them off before replacing them in their proper positions on the battery posts. Check that all connections are tight and secure before trying to start again. Check fuses in case there has been a short circuit or overload in the wiring system of your mower.
What If The Ferris’s Zero Turn Mower Not Working After Consulting Manual?
The first thing you should do is check out the manufacturer’s website. Ferris has a lot of information that can help you determine if your problem is related to an issue with the mower or something else. In addition, they have an excellent customer service department that can help you fix any problems with your mower.
If the problem needs to be covered in the owner’s manual or by their website, then it might be time to call them directly. They have a toll-free number (1-800-634-6897) that you can use anytime during business hours (8:30 AM – 5:00 PM CST). If it’s after hours or on the weekend, then call their local number, which is also available through their website.
Does Ferris Make A Good Zero-Turn Mower?
Yes, Ferris makes a good zero-turn mower. Their machines are built to run for years and years.
Their tractors are known to be tough as nails, but they’re not cheap. You can get a great deal on a used one if you find the right model and ensure it’s still in good condition before making an offer.
What Are The Disadvantages Of Ferris’s Zero-Turn Mower?
The disadvantages of Ferris’s zero-turn mower are:
- It is very bulky and heavy.
- It is expensive.
- The gas tank is small, and the carburetor is not powerful enough to support the engine.
- The blades need to be sharp enough to cut grass easily.
Why Is My Ferris Zero-Turn Mower Vibrating?
There are many reasons why your Ferris zero-turn mower is vibrating.
- The first thing to do is to check all of the blades.
- If they are not sharp, then sharpen them.
- If they are still not cutting properly, replace them with new ones.
- Next, check the belt and pulleys to ensure everything is tight and in place.
- If all of these things checked out okay, there is something wrong with the engine or transmission.
You must take it to a Ferris dealer for repairs or replacements.
Is A Ferris Mower Worth It?
Ferris is known for producing high-quality, durable zero-turn mowers that can handle even the toughest jobs around your property. The company has gained popularity among consumers who want to save time but still get professional results regarding their lawns and gardens. If you’re looking for an affordable way to improve your outdoor spaces without breaking the bank, consider purchasing one of these machines.
Conclusion
The company’s zero-turn lawnmowers are popular with homeowners because they make cutting the lawn easier, faster, and less tiring. Ferris offers several different models of zero-turn mowers, but all have similar features that make them stand out from other brands of zero-turn mowers.
